COOLSAT 8100 HD (also works for 7100 7000 6100 6000 / 5000 / 4000) REMOTE CONTROL

1) Features

This project will programmed and support TV, VCR, DVD, SAB for American. (chip:CMS81032
OTP 24PIN, ROM SIZE:16K)
The TV, VCR, DVD keys are used to select the device you Want to control.

2) Digit Programming & Key Activation

Using your DEVICE code No.

• Step 1. Turn on your DEVICE.
  
• Step 2. Press OK Key and press DEVICE Key in 2 seconds at the same time.
  LAMP LED will blink twice
  
• Step 3. Press three Digit Codes Number
  LAMP LED will blinks
  If the Digit Codes Number is not pressed in the course of 10 seconds, this function is
  canceled.
  
• Step 4. LAMP LED will blink twice.
  The current setting code is right
  If LAMP LED blink in 1 seconds, code is wrong.

Search method - If Your DEVICE Does Not Respond.

• Step 1. Turn on your DEVICE.
  
• Step 2. Press OK Key and press DEVICE Key in 2 seconds at the same time.
  LAMP LED will blink twice
  
• Step 3. Press CH+ or CH- key until DEVICE turns off,one and one.
  LAMP LED will blink
  If the CH+ or CH- key is not pressed in the course of 10 seconds, this function is canceled.
  If your DEVICE is turn off
  
• Step 4. Press OK key
  LED will blink Twice
  Please use this method if none of the Set-Up Code numbers worked for your device during the three digit
  code method or if the manufacturer or brand for your device if not listed in Set-Up Code Tables.

3) Special Function
Code No.Check. If you want to know which Code No.was set,

• Step 1. Press OK Key and press DEVICE Key in 2 seconds at the same time
  LED will blink twice
  
• Step 2. Press Display key
  If the Display key is not pressed in the course of 10 seconds, this function is canceled.
  
• Step 3. LED will blink twice
  
• Step 4. After 2 seconds,LED will blink.
  LED will blink according to first,second and third digit for the current setup code.
  case of digit 0, the LED blinks 10 times.
  At RESET, DEVICE default code is 000.